Exposición y Conferencia de Pruebas Automotrices en México El Grupo Automaker Media lleva a cabo esta exposición en Brasil, Turquía y Gran Bretaña; debido al crecimiento de las Pruebas y Desarrollo en México, la Exposición de Pruebas Automotrices se llevará a cabo en marzo del 2017 en Querétaro, México.

Expositores

Convocatoria de informes técnicos

Participe con nosotros. Esperamos la presentación de sus trabajos y su asistencia (o participación)

Estamos en una época donde muchos de los cambios en el desarrollo de los procesos en la industria automotriz están abriendo el camino hacia el futuro. Uno de los elementos clave es la fusión interdisciplinaria de simulación y pruebas que apenas está comenzando.



Características del Evento

NVH (Ruido, Vibración y Dureza)
Simulación de pruebas
Seguridad de los ocupantes y peatones
Pruebas de motores y emisiones
Simulación de pista
Pruebas de laboratorio
Dinamómetros
Dinámica del vehículo
Pruebas de materiales
Aerodinámica
Pruebas de microelectrónica
Pruebas de fatiga
Pruebas de torsión
Prueba de componentes
CEM (Compatibilidad Electromagnética)/Eléctrica
Instalaciones de pruebas
Prueba de combustibles y sistemas integrales
Software de administración de pruebas
Pruebas en túnel de viento
Pruebas de vibración
Pruebas acústicas
Pruebas ambientales
Pruebas de neumáticos
Adquisición de datos y análisis de señales
Pruebas de impacto
Electrónica
Pruebas mecánicas
Pruebas hidráulicas
Pruebas de sistemas eléctricos
Pruebas de confiabilidad
Análisis de pruebas de choque
Pruebas de interferencia
Pruebas estructurales y de fatiga
Pruebas de impacto y choque
Sensores y transductores
Diseño de las instalaciones de prueba
Prueba e inspección de calidad
Sistemas de telemetría
Simulación de vehículos
Inspección automática
Pruebas de tensión/compresión
Calibración
Instrumentación de laboratorio
Prueba y desarrollo de software
Soluciones del manejo de calidad
Equipo de prueba automatizado

¿Quiénes deberían asistir?

  • Fabricantes de Equipos Originales (OEM’s)
  • Proveedores T1, T2 y T3
  • Proveedores de tecnología y equipos
  • Inversionistas e instituciones financieras
  • Compañías de logística y transporte
  • Proveedores de inspección de calidad y normas
  • Exportadores e Importadores
  • Distribuidores
  • Analistas, investigadores y consultores de la industria
  • Órganos gubernamentales y asociaciones comerciales

¿Qué incluye el paquete de registro a la conferencia?

Este costo incluye el acceso a ambos días del evento, acceso al área de networking, comidas, networking breaks y presentaciones.


Event Agenda

Automotive Testing Show & Expo 29th and 30th of MARCH 2017

@ Automotive Testing Show & Expo Mexico.

SESSION ONE
WELCOME & INVITED LECTURES MORNING COFFEE BREAK
09:25 – 09:30 Welcome and proceedings overview
William Fone – Director
Automaker TV & Media Limited
09:30 – 10:00 Local development validation planning process, from complete vehicle to materials. Rainer Hofmann, CEO,.
Dirk Scheffler, Head of Laboratory
EDAG Mexico S.A. de C.V
10:00 – 10:30 Increasing productivity for machining operations of aeronautical and automotive components by chatter suppression
and optimization techniques

Dr. Prof. Daniel Olvera
Tecnológico de Monterrey, Mexico
10:30 – 11:00 Dynamic measurement of transmission error and backlash in automotive differential
Aldo Adrián García González
CENAM, Mexico
11:00 – 11:30 Morning Break
11:30 – 12:00 Solutions to NVH Challenges using Laser Doppler Vibrometry
Mario Pineda, Director
Polytech, U.S.A
12:00 – 12:30 Transfer Path Analysis on Rotating Systems
Stefan Kremer – Manager
Mueller BBM, Germany
12:30 – 14:00 Break
14:00 – 14:30 Advanced powertrain control unit calibration and testing methods
Oliver Rütten – Head of Calibration
FEV América Latina, Brazil
14:30 – 15:00 Powertrain Integration Analysis using AVL EXCITETM
Raul Gutierrez
AVL List, Mexico
15:00 – 15:30 Embracing the connected car
Marisol Menéndez Huerta, Field Marketing RF and Test
National Instruments, Mexico
15:30 – 16:00 Driving Innovative Powertrain Design through Upfront Simulation
Warren Dias
Altair Inc, U.S.A
16:00 – 16:30 Afternoon Break
16:30 – 17:00 Using Fatigue Damage Spectrum for Accelerated Testing with Correlation to End-Use Environment
Andy Cogbill, Senior Application Engineer
Vibration Research USA.
17:00 – 17:30 Ground Vehicles Durability Test Overview
Hartmut Schlosser, Senior Application Engineer, Ground Vehicle Team
MTS Europe, Germany.
16:30 Exhibition Visit time
SESSION FIVE
Lab Management
09:25 – 09:30 Welcome Day 2
Vehicle Testing and Development

William Fone – Director
Automaker TV & Media Limited
09:30 – 10:00 Innovative Vehicle Concept Development through Collaborative Simulation
Warren Dias, Business Development Manager-OptiStruct.
Altair, U.S.A
10:00 – 10:30 Integrated Vehicle Testing for CO2 Certification of Heavy Duty Vehicles
Dr.-Ing. Jakub Vidner, Dr.-Ing. Sönke Treinies;
Kistler Instrumente GmbH, Germany
10:30 – 11:00 Dynamic characterization of MEMS accelerometers embedded into IMU sensor
Iris López
CENAM, Mexico
11:00 – 11:30 Morning break
11:30 – 12:00 Slow Motion Analysis Considerations for Automotive Applications
Andrew Bridges – President
Photron , United States
12:00 – 12:30 Alistair Tofts
Correlated Solutions
12:30 – 14:00 LUNCH & Exhibition visit time
14:00 – 14:30 Inertial Systems with precise GPS for automotive testing
Dr Berthold Huber,
Genesys Elektronik GmbH, Germany
14:30 – 15:00 Robots systems for test stands and proving grounds
Klaus Staehle – CEO
Staehle, Germany
15:00 – 15:30 How to use GPS/Inertial Systems as a reference for vehicle dynamics and ADAS testing
Berthold Huber, Managing Director
GENESYS, Germany
15:30 – 16:00 Afternoon break
16:00 – 16:30 RF, Vision and Customized Simulation for the next generation of the HIL test
Arturo Vargas Mercado. Latam Marketing Manager
National Instruments, Mexico
16:30 – 17:00 Performance Testing Overview
Hartmut Schlosser, Senior Application Engineer, Ground Vehicle Team
MTS Europe, Germany
FINAL COMMENTS & FAIRWELL

Conocimiento, Innovación y Networking. Únase al evento técnico de ingeniería automotriz más completo del país.

La Exposición y Conferencia de Pruebas Automotrices se llevará a cabo en Querétaro, México el 29 y 30 de marzo del 2017.


¡Regístrese ahora!

INFORMACIÓN DE LA COMPAÑÍA


Expositores Confirmados 2017

Sitio Web: www.abd.uk.com

Sitio Web: acmax.mx/es

Sitio Web: www.concept-tech.com

As a full-range provider of engineering, simulation, testing and tools for passive safety development, Altran Concept Tech is a leader in the fields of vehicle interior, pedestrian protection, crash/component test and test system development (renowned worldwide as “Microsys” equipment). With expertise and support globally available, Altran Concept Tech is the partner of choice for leading OEMs and Tier-1’s.

We are looking forward to welcoming you at our booth to show you our latest developments in passive safety engineering and testing.

Sitio Web: www.altran-na.com

Altran North America is an engineering consulting partner to businesses in Aerospace and Defense, Automotive, Digital markets, Energy, Industrials and Electronics, and Life Sciences & Medical. We offer solutions that combine disruptive technologies, complex software development expertise, and innovative processes to solve the business and technical challenges inherent in conceiving, developing, and supporting the complex, connected systems demanded by markets driven by rapidly evolving technology.

In North America, Altran serves our clients out of a network of offices in the US, Canada, and Mexico.

Sitio Web: www.altair.com

Altair empowers client innovation and decision-making through technology that optimizes the analysis, management and visualization of business and engineering information. Privately held with more than 2,000 employees, Altair has offices throughout North America, South America, Europe and Asia/Pacific. With a 28-year-plus track record for high-end software and consulting services for engineering, computing and enterprise analytics, Altair consistently delivers a competitive advantage to customers in a broad range of industries. Altair has more than 5,000 corporate clients representing the automotive, aerospace, government and defense, and consumer products verticals. Altair also has a growing client presence in the electronics, architecture engineering and construction, and energy markets.

Sitio Web: www.concept-tech.com

As global leader in innovation and high‐tech engineering consulting, Altran accompanies its clients in the creation and development of their new products and services.

Sitio Web: www.averna.com

As a global Test & Quality Solution leader, Averna partners with product designers, developers and OEMs to help them achieve higher product quality, accelerate time to market and protect their brands. Founded in 1999, Averna offers specialized expertise and innovative test, vision inspection, precision assembly and automated solutions that deliver substantial technical, financial and market benefits for clients in the aerospace, automotive, consumer, defense, life sciences, semiconductor, telecom and other industries. Averna has offices around the world, numerous industry certifications such as ISO, CSIA, and ITAR registration, and is partnered with National Instruments, Keysight Technologies and JOT Automation.

Sitio Web: www.avl.com

AVL is the world's largest independent company for the development of powertrain systems with internal combustion engines, as well as instrumentation and test systems. AVL acts in the following business areas:

Development of Powertrain Systems

AVL develops and markets all kinds of powertrain systems, and is a competent partner to the engine and automotive industry.

Simulation

In addition, AVL develops and markets simulation methods necessary for development work.

Engine Instrumentation and Test Systems

The products of this business area comprise all the instruments and systems required for engine and vehicle testing.

Sitio Web: www.battenberg.biz

Customers in many industrial sectors around the world trust the results of our measuring robotics systems to evaluate their product quality. This particularly includes the important evaluation criteria of perceived value, impressions, customer loyalty, and brand differentiation. The challenges of global quality evaluations taking different cultures and regions into consideration can be met by measuring robotics systems due to their conversion flexibility.

Sitio Web: www.capetesting.com

At CAPE, we’re Bringing Safety to People.

The Center for Advanced Product Evaluation (CAPE), is the only crash test facility of its kind in the world and Automotive International Testing Magazine’s 2011 Crash Test Facility of the Year. CAPE has over 40 anthropomorphic test dummies (ATDs), three (3) sleds and a one (1) million Kg barrier to aid in providing a broad range of dynamic and quasi-static safety testing. The most recognized transportation manufacturers of heavy trucks, school buses, recreational off-road vehicles, military, and fire/EMS vehicles choose CAPE, the worldwide leader in safety validation, for premier testing and analysis services. CAPE has the equipment and expertise to help our customers improve their products through unsurpassed quality, credibility, responsiveness, and precise results.

Sitio Web: www.correlatedsolutions.com

Our turn-key image correlation systems have been developed from the ground up with ease-of-use, reliability and accuracy in mind. Our company includes the people who invented Digital Image Correlation. Collectively, we have more than 80 years’ experience in this field, and we are the world leader in this technology.

Sitio Web: www.solutionscei.com

Somos una empresa 100% mexicana , con más de 20 años de experiencia en el desarrollo de soluciones integrales para la industria automotriz e industria en general que requiera equipo, servicios o capacitación técnica, a través de nuestros expertos en las áreas. Somos Representantes Autorizados en México y Centro América de marcas mundialmente conocidas como: Sensor Development Inc. , Tekscan, GTI, Tonichi, Uryu, GWK, Microcontrol entre otras. Algunos de nuestros productos ya cuentan con número de parte en VW.

Sitio Web: www.crystalinstruments.com

Founded in 1996, Crystal Instruments (CI) is a leading manufacturer of dynamic measurement, signal analysis, and vibration testing equipment. Crystal Instruments is headquartered in Santa Clara, California, the center of Silicon Valley. Currently, CI products are distributed in over 40 countries around the world.

Crystal Instruments founders James Zhuge Ph.D and Justin Tang previously founded Dactron, which established industry benchmarks with innovative technology. Zhuge and Tang continue leading innovation with Crystal Instruments today, driving the development of the most technologically advanced data acquisition and vibration control products available in the market.

Sitio Web: www.dspace.com

Our systems enable you to reduce development times and costs dramatically when you design ECUs and controllers, which systematically increases your productivity. The reason is our optimal mix of standard solutions for rapid control prototyping, automatic production code generation, hardware-in-the-loop simulation, and ECU calibration.

There are 1,200 dSPACE employees worldwide. dSPACE systems are distributed by the headquarters in Paderborn, subsidiaries in the USA, France, the UK, Japan, and in China.

Sitio Web: www.dtsweb.com

Since 1990 DTS has been a leading manufacturer of data acquisition systems and sensors for occupant safety testing and product testing in automotive, aerospace, biomechanics, blast and in-dummy applications. DTS specializes in advanced measurement solutions that require high-speed, miniature, rugged DAS and sensors for critical tests in extreme environments.

Sitio Web: www.edag.de

Mobility fascinates our customers. Progress in mobility creates enthusiasm. A lot of passion has often gone into developments that impress others. Our aim is to not only leave a lasting, good impression with our work, attitude and manner, but also to guarantee a competitive edge for our customers. Outstanding feedback from a very satisfied customers is our incentive.

Sitio Web: www.espec.com

Sitio Web: www.genesys-offenburg.de

Focusing on automotive testing GeneSys presents its inertial measurement system ADMA for six degree of freedom motion analysis in combination with high performance GPS position measurement. ADMA is designed for vehicle dynamics testing including deceleration/acceleration testing, tyres testing, road holding test, kinematic and elasto-kinematic as well as handling and track analysis, verification of simulation models and of driver assistance systems.

The new generation of ADMA is equipped with an output rate of 1000 Hz and new functions, e.g. DELTA function for direct range measurement for ADAS testing (FCW, LDW, ACC, AEB).

Another highlight is ADMA-Speed. The braking and distance sensor with integrated inertial sensors is optimized for brake tests. ADMA-Speed eliminates the wellknown disadvantages of standard GPS speed sensors.

Sitio Web: www.ui-joyoung.com

Hangzhou Joyoung Trade Co.,Ltd is located in Hangzhou, Zhejiang, China, who mainly provide professional automotive testing equipments and testing system solutions. Including whole vehicle, braking system, steering system, transmission system, electric appliances, new energy and body accessories.

Our HongKong office UI(China United Industrial Co.,Limited) is the international market office the under license of CAERI(China Automotive Engineering Research Institute) and TED(Chongqing CAERI Automobile Test Equipment Development Co.,Ltd). Our team, comprising of technically qualified engineers and technicians, we are always there to provide convenience and better service to our customers. All customers are most welcome to contact us!

Sitio Web: www.haidar-inc.com

Sitio Web: www.intrepidcs.com

Intrepid Control Systems creates tools for engineers in vehicle, test, and embedded engineering. Intrepid provides embedded communication interfaces for AUTOSAR, CAN, LIN, FlexRay, CAN FD, Automotive Ethernet, Keyword, UART, J1939, ISO14229 and GMLAN. Intrepid is part of the Automotive Engineering Tool Alliance (www.aeta-rice.com), a comprehensive tool chain for automotive electronics development.

Sitio Web: www.julabo.com

Since its founding in 1967 JULABO has consistently set new standards for high-performance and reliable temperature control. Today JULABO is an industry leader. We have played a significant role in the development of fluid-based temperature control. Our expert engineers and technicians help shape the market with new ideas and innovations. This experience and know-how allows us to continuously improve JULABO products as needs evolve. JULABO is where the future of temperature control becomes reality.

Sitio Web: www.keysight.com

Keysight Technologies Inc. (NYSE: KEYS) is the world's leading electronic measurement company, transforming today's measurement experience through innovations in wireless, modular, and software solutions. With its HP and Agilent legacy, Keysight delivers solutions in wireless communications, aerospace and defense and semiconductor markets with world-class platforms, software and consistent measurement science. The company's nearly 10,500 employees serve customers in more than 100 countries.

Sitio Web: www.kimeca.com.mx

Kimeca.NET®, S.A. de C.V. is a Mexican company leader in the product design and development. Provides engineering products and services to satisfy the national and international industry needs. Our solutions cover the virtual and physical testing. In the virtual field we offer PLM /CAD /CAM /CAE, for physical testin provides DAQs and sensors. The engineering tools we provide are the same tools we use for the engineering services we provide, more than 15 years using this tools. We provide the technical support to use the tools but also to design new products.

Sitio Web: www.kistler.com

Kistler is a leading supplier of sensors and systems for automotive research & development. Kistler's product range includes RoaDyn wheel force sensors and Correvit optical speed sensors for the measurement of vehicle dynamics. In addition Kistler offers an extensive range of pressure sensors for combustion analysis.

Sitio Web: www.kuebrich.com

Kübrich Ingenieurgesellschaft mbH & Co. KG develops and manufactures Test Systems for testing and ensuring the functionality and quality of complex mechatronic assemblies.

Our customized solutions are designed for control and data processing in endurance test facilities for product development and End-of-Line test stations.

Starting with the analysis of the given task, we develop an implementation concept where all factors are taken into account. Through the interaction of intelligent software, sophisticated hardware and high precision components, we create automatically operating test assemblies.

Kübrich Test-Equipment is primarily used for testing of e.g. window lifters, seats, doors and to perform battery simulations.

Sitio Web: www.micro-sys.com

Microsys Technologies Inc., part of the Altran Group, supplies the automotive industry with the leading test systems for integrated safety. Our range of products includes airbag and pretensioner test systems, pedestrian protection, interior (FMVSS201u) and ejection mitigation test systems. Our equipment is carefully designed with the user in mind. We are sure this is what makes, for example, the Microsys SureFire airbag test system the most popular development tool of its kind. As part of the Altran group, Microsys provides its products and services worldwide.

We are looking forward to showing you our latest developments in passive safety test equipment.

Sitio Web: www.mts.com

Measurement. Accuracy. Certainty. These concepts allow engineers in research, product development and manufacturing to turn mere ideas into tangible, working results. MTS Systems Corporation is dedicated to making this transformation faster, easier and more successful.

Sitio Web: www.MuellerBBM-vas.de

Müller-BBM VibroAkustik Systeme is one of the world’s leading suppliers of vibroacoustic measurement technology, focused on the acquisition, analysis and management of dynamic data. Our tight partnership with the automotive industry has resulted in comprehensive testing solutions for the NVH development of vehicles and their subcomponents, such as powertrain and chassis, for more than 30 years. PAK is a strong partner for all NVH measurement and analysis tasks. Our new PAK live technology steps up the efficiency and performance when measuring – setting the path for future-oriented workflows that Industry 4.0 testing solutions require. Choose us for your rotational, structural and acoustic testing needs.

Sitio Web: www.ni.com

Sitio Web: www.ntech-mty.mx

Desarrollamos productos de diseño proprio para la industria local y nacional. Somos especialistas en productos y servicios tecnológicos y de automatización orientados a la industria en general y aplicaciones de medición, pruebas y control.

Sitio Web: photron.com

Photron provides high-speed cameras for slow motion analysis of events that occur too fast for the eye to see. Our cameras can record at speeds of up to two million frames per second (fps), and include low cost, mega-pixel, high-G and multi-head systems for on and off board slow motion analysis of every aspect of vehicle and passenger safety and component testing.

Sitio Web: www.polytec.com

Polytec is a global corporation with facilities in Europe, North America and Asia. With a reputation for innovative optical products, outstanding quality and world-class support, our success has enabled investment in the resources and flexibility to respond quickly to the ever-changing measurement needs of our customers.

Sitio Web: www.sitec.mx/nosotros.php

SITec es una empresa que nace con la vocación de servir y atender las necesidades de nuestros clientes brindándoles soluciones de ingeniería que satisfagan sus requerimientos en el área de pruebas y ensayos para Control de Calidad, Confiabilidad, Desempeño, Inspección, Monitoreo, Investigación y Desarrollo de producto entre otras.

Sitio Web: www.stahle.com

Sitio Web: www.tekscan.com

Sitio Web: www.testequity.com/

TestEquity con entidad legal Meixcana como TestEquity de Mexico S. de R.L de C.V. y con Centro de Operaciones en Ciudad Juárez, Chihuahuay almacenesen Guadalajara,Reynosa,Tijuana,Chihuahuay Hermosillo,es un distribuidor de valor agregado de equipos de prueba y medición,y suministros para la producción y laboratorios de electrónica.

Sitio Web: thermotron.com

With more than 50 years of experience, Thermotron is a premier worldwide manufacturer of high-performance environmental test chambers and vibration test systems. We work with the world's greatest companies from many different industries to develop test equipment to meet a variety of testing requirements. Thermotron employs the largest application, service, and design engineering staff in its industry. We strive to exceed our customers’ expectations by identifying customer needs, producing superior testing equipment, and offering comprehensive service. We pride ourselves on being a single-source supplier to our customers, providing complete, sophisticated turnkey environmental test systems.

Sitio Web: unitedtesting.com

With over 50 years in business, United Calibration Corporation has become one of the world’s premier manufacturers of state-of-the-art material testing systems. United offers universal testing machines for compression and tensile testing, hardness testers, material test fixturing, accessories and software and related calibration services throughout the U.S. and internationally through a network of factory authorized representatives. United customers have come to appreciate United’s dedication to quality, performance, value and customer satisfaction. Our experienced staff at the factory in Huntington Beach, California, and at our sales and service facility in Flint, Michigan stand ready to meet your material testing hardware, software and service requirements.

Sitio Web: www.vibrationresearch.com

U.S.-based Vibration Research (VR) is the leading innovator in vibration control. We listen to our customers’ needs and offer testing products, software and support that deliver unrivaled value. Our VR9500 Revolution Vibration Controller and VibrationVIEW software includes patented innovations used by testing labs and engineers throughout the world. iDOF™, FDS, FDR, and Kurtosion® are a few of VR’s applications that ensure accurate and fast vibration testing.

Sitio Web: www.weh.us

Sitio Web: www.weiss-na.com

Weiss Technik North America is a global leader in the design, manufacture and service of environmental test chambers for the automotive industry. We partner with our customers in North American, Europe, Asia and around the globe to find the right solutions. Our wide range of products are used for design and validation testing in research, development, quality assurance and production. Solutions include testing systems for temperature/humidity, weathering, salt spray/corrosion, thermal shock, walk-in/drive-in systems, environmental stress screening and HALT/HASS vibration systems. Additional chambers in the Weiss Technik North America line include chambers for full vehicle development with integrated MAST systems, four-post systems, measuring robotic systems, vacuum test chambers, fuel evaporation chambers (SHED), fuel conditioning units, airbag test chambers, air conditioner test benches, thermal test units, altitude and many more. Weiss Technik North America is ISO9001 Registered and ISO17025 Accredited.

Sitio Web: www.wthgis.com

We're well known as the creators of a popular suite of GIS software products. Our flagship product, Think GIS®, is a powerful, easy to use geographic information system and it provides the foundation of all our location based solutions. That would cause most people to say that WTH is a software company. However, the truth is, our software products are merely a tool that we use to provide comprehensive services to our clients. The solutions we work with our clients to develop deliver a wide variety of functionality. Our goal is to design a set of deliverables including products and services that efficiently and effectively meet each client's specific goals and objectives. We have the experience and expertise to design custom solutions based on the vision that our clients bring to the table. While it's true that we develop software, our mission is to empower local communities with tools and consultative support to help them do their jobs better, faster and smarter.


Información del Evento

  • Entrega de gafetes para Expositores
    28 de marzo del 2017 (Un Día Antes)
    18:00 | 20:00

    Apertura del Registro, EXCLUSIVO para conferencistas y expositores
    29 de marzo del 2017 (Primer Día)
    07:30 | 08:30

    Registro para todos los visitantes
    8:30 el 29 de marzo del 2017 (Primer Día) hasta 15:00 el 30 de marzo del 2017 (Segundo Día)

  • CONVOCATORIA DE INFORMES TÉCNICOS Congreso de Pruebas y Simulación

    Se presentará en la exposición el estado actual de las soluciones para trenes motrices, componentes y sistemas de vehículos, así como las herramientas de simulación y prueba que permiten un desarrollo eficiente de los trenes motrices y vehículos del futuro.

    Participe con nosotros. Esperamos la presentación de sus trabajos y su asistencia (o participación)

  • Guía de la Exposición 2017

    Revista Automaker
    Exposición de Pruebas Mexico 17 | Edición Especial

  • 29 de marzo 2017 (Primer Día)
    09:00 | 19:00

    30 de marzo 2017 (Segundo Día)
    09:00 | 17:00

Ubicación del Evento


Querétaro
Centro de Congresos

www.qcc.mx


Calle Paseo de las Artes 1531-B, Josefa Vergara, 76090 Santiago De Queretaro, QRO, México